Unpacking, Intended use, Assembly – Snow Joe iON16LM 40-Volt Cordless 16-Inch Lawn Mower w/ Brushless Motor User Manual

Page 8: Carton contents, Fitting the upper and lower handles

Advertising
background image

8

Unpacking

Carton Contents

• Cordless lawn mower
• 40 V EcoSharp

battery

• EcoSharp

battery charger

• Grass bag
• Safety key
• Upper handle knob and bolt (2)
• Cable clip (2)
• Manual

1. Carefully remove the lawn mower and check to see that all

of the above items are supplied.

2. Inspect the product carefully to make sure no breakage

or damage occurred during shipping. If you find damaged

or missing parts, DO NOT return the unit to the store.

Please call the Snow Joe

®

/Sun Joe

®

customer service

department at 1-866-766-9563.

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new cordless lawn

mower. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations.

IMPORTANT! The equipment and packaging material are not

toys. Do not let children play with plastic bags, foils or small

parts. These items can be swallowed and pose a suffocation

risk!

Intended Use

Carefully follow the instructions below to assemble your

iON cordless lawn mower.
The equipment may only be used for the tasks it is designed

to handle. Any other use is deemed to be a case of misuse.

The user/operator, not the manufacturer, will be liable for any

damage or injuries of any kind resulting from such misuse of

the mower.
The lawn mower is intended for private residential use (i.e. for

use in home and gardening environments). Private use of the

lawn mower refers to an annual operating time generally not

exceeding 50 hours, during which the machine is primarily

used to maintain small-scale, residential lawns and home/

hobby gardens. Public facilities, sporting halls and agricultural/

forestry applications are excluded. Please note that this

equipment has not been designed for commercial, trade

or industrial applications. The warranty will be voided if the

machine is used in commercial, trade or industrial businesses

or for equivalent purposes.
Keep these instructions and refer to them prior to each

mowing session in order to ensure that the lawn mower

is properly used and maintained. The instructions contain

valuable information on operating, maintenance and servicing.

IMPORTANT! Due to the high risk of bodily injury to the user,

the lawn mower may not be used to trim bushes, hedges or

shrubs, to cut scaling vegetation, planted roofs, or balcony-

grown grass, to clean (suck up) dirt and debris off walkways,

or to chop up tree or hedge clippings. Moreover, the lawn

mower may not be used as a power cultivator to level out high

areas such as molehills.
For safety reasons, the lawn mower may not be used as a

drive unit for other work tools or toolkits of any kind.

Reduce noise generation and keep

vibration to a minimum!

• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adjust your work rate to the equipment's performance.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.

Assembly

Fitting the Upper and Lower Handles

1. The handle is fully pre-assembled and must only be

unfolded and adjusted to the required height. To do so,

loosen the upper handle knobs and unfold the upper

handle. Then secure the upper handle again with the

handle knobs on each side (Fig. 1).

Fig. 1

Upper handle knob

Upper handle

Advertising