Snow Joe SB601E SharperBlade Electric Stringless Trimmer/Edger - Manual (Page 6)

6
4) Place the Shield over the blade shaft and snap into place
(Figure 3).
5) Now the diameter of the protection area is 9 inches (Figure
4).
6) Ultimately you can remove the flower guard from the
motor cover. This will allow you maximum use of the
SharperBlade.
NOTE: Be careful when operating the machine while steel
flower guard is removed.
Installing or Changing Blade
1) Remove screw knob (Figure 5).
2) Remove the washer (Figure 6).
3) Assemble the SharperBlade to the Electric Trimmer/Edger
(Figure 7).
screw knob
washer
Sharper Blade
Figure 3
Figure 6
Figure 7
Figure 5
Figure 4