Battery pack operation, Charger operation m, Battery charge level indicator – Snow Joe iON16LM-RM 40-Volt Cordless 16-Inch Lawn Mower w/ Brushless Motor User Manual

Page 10: When to charge the ecosharp, Ibat40 lithium-ion battery, Installing and charging the battery

Advertising
background image

10

Battery Pack Operation

The equipment is fitted with a lithium-ion battery. The battery

pack is completely closed and maintenance free.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking

the charge level. Simply press the push button to read off the

battery charge level from the LEDs of the battery indicator:

• All 3 level monitoring LEDs are lit: Battery charge level

is high.

• 2 level monitoring LEDs are lit: Battery charge level is

decreasing. Stop work as soon as possible.

• 1 level monitoring LED is lit: Battery is flat. Stop work

IMMEDIATELY and charge the battery. Otherwise the

battery’s service life will be greatly shortened.

NOTE: If the charge level button does not appear to be

working, place the battery pack on the charger and charge as

needed.
Immediately after using the battery pack, the charge level

button may display a lower charge than it will if checked a few

minutes later. The battery cells “recover” some of their charge

after resting.

Charger Operation

m

WARNING!

Charge only EcoSharp

iBAT40 lithium-ion

battery packs in compatible EcoSharp

iCHRG40 lithium-ion

battery chargers. Other types of batteries may cause personal

injury and damage.
To reduce the risk of electric shock, do not allow water to flow

into the charger's AC/DC plug.

When to Charge the EcoSharp

iBAT40

Lithium-Ion Battery

NOTE: The EcoSharp

iBAT40 lithium-ion battery packs do

not develop a "memory" when charged after only a partial

discharge. Therefore, it is not necessary to run down the

battery pack before placing it into the charger.

• Use the battery charge indicator lights to determine when to

charge your EcoSharp

iBAT40 lithium-ion battery pack.

• You can "top-off" your battery pack's charge before starting

a big job or after a long day of use.

Installing and Charging the Battery

1. Open the battery cover on the lawn mower by depressing

the locking button found on the outside of the battery

compartment (Fig. 6).

2. Pull the push lock button on the battery to pull the battery

pack up and out of the equipment (Fig. 7).

Charge level button
The battery is at 30% capacity

and requires charging
The battery is at 60% capacity

and requires charging soon

The battery is at full capacity

Light Indicators

Lights

Fig. 6

Locking

button

Fig. 7

Push lock button

Advertising