Assembly, Assembling the handle (fig. 2), Installing the grass catcher bag (fig. 3) – Snow Joe MJ407E-RM Mow Joe 20-inch Bag/Mulch/Side Discharge Electric Lawn Mower User Manual

Page 5: Install the side discharge chute (fig. 4)

Advertising
background image

Assembly

Parts List

• Mulch plug
• Grass catcher bag
• Manual
• Discharge Chute

Note:

• Carefully remove the parts from the box.
• Inspect the parts carefully in order to verify that no

breakage or damage occurred during shipping.

• Do not discard the packing material until all parts have

been examined.

Assembling the Handle (Fig. 2)

1. Remove any packing material which may be between

the upper and lower handles for sahipping purposes.

2. Pull up and back on the upper handle to raise the

handle into the operating position. Make sure the lower
handle is seated securely into the handle mounting
bracket.

3. Align the holes (C) between the upper handle (4) and

lower handles (5). Insert the bolts (B) and tighten them
with the wing nuts (C) provided. (Fig. 2)

4. Secure the lower handle to the bracket with the handle

knob on each side. (Fig. 2)

Installing the Grass Catcher Bag (Fig. 3)

1. UNPLUG THE POWER CORD, AND WAIT FOR BLADE

TO COME TO A COMPLETE STOP.

2. Lift the chute cover. (1)
3. While holding up the cover (1), place the grass catcher

bag hanger hooks (2) into the opening on the chute
cover (1) to allow the hanger hooks to attach to the rod
(3) which secures the chute cover.

NOTE:

For optimal performance empty grass bag often

during use. A full grass bag will inhibit performance of the
mower and collection of grass clippings.

Install the Side Discharge Chute (Fig. 4)

This mower has 3 different functions-mulch, side discharge,
and rear bag. If you wish to discharge the clippings rather than
mulch, perform these steps.

1. UNPLUG THE POWER CORD, AND WAIT FOR BLADE

TO COME TO A COMPLETE STOP.

2. Lift the side discharge cover (1).
3. Align the grooves on the discharge chute (2) with the

pins on the underside of the discharge cover (1).

4. Lower the discharge chute until the hooks on the

mower deck are secured in the openings in the
discharge chute (2).

5. Release the side discharge cover (1).

5

Fig. 2

Fig. 3

Fig. 4

4

5

A

B

C

1

2

2

3

2

1

Advertising