Canon MF 3240 Series - Manual (Page 125)

12-10
Ma
chine Settings
RX TERMINAL ID Sets whether to insert the machine’s fax number and the
sender information on received faxes.
– OFF
– ON
RX RESTRICTION Sets whether to receive a fax by detecting the TSI
(Transmitting Subscriber Identification) signal, used to
identify the sending fax machine. (See Chapter 1,
“Advanced Fax Features (MF3240 Only),” in the Advanced
Guide.)
OFF All receptions are conducted.
ON Receives the fax only from the sending fax machine that
sends the TSI signal.
REMOTE RX Sets whether to use remote receiving. (See Chapter 1,
“Advanced Fax Features (MF3240 Only),” in the Advanced
Guide.)
– ON
– OFF
CONT. PRINTING Sets whether to stop printing when toner has run out. This
function is only for Fax printing and printing reports.
– OFF
– ON
4 COMMUNICATIONS Sets the communication setting.
TEL LINE TYPE Selects the telephone line type. (See “Set the Machine for
Sending Faxes (MF3240 Only),” in the Starter Guide.)
TOUCH TONE The telephone line is set for touch tone dialing.
ROTARY PULSE The telephone line is set for rotary pulse dialing.
R-KEY SETTING Registers the [R] key to access an outside line easily. (See
Chapter 1, “Advanced Fax Features (MF3240 Only),” in the
Advanced Guide.)
– PSTN
– PBX
FAX SETTINGS (MF3240 Only)