Char-Griller 5050 User Manual
Page 15
Step 15
Install the GAS CHIMNEY to the GAS GRILL HOOD and the CHARCOAL CHIMNEY to the
CHARCOAL GRILL HOOD. Insert the CHIMNEYS through each hole from inside the
HOOD
and secure with two (2) HEX NUTS and two (2) ½” BOLTS for each CHIMNEY, see
below.
Step 16
Insert the THERMOMETERS into the GRILL HOODS and secure with two (2) WING NUTS as shown.
Step 17
OO S
G
O
S
G
S
Attach HOODS to the GRILL BODIES using HINGE PINS as shown. Have your helper stand behind the
grill to hold the HOODS in place and keep them from falling. First place the GAS HOOD onto the GRILL
BODY in the closed position then screw the left HINGE PIN into place. Then place the Charcoal HOOD
in place and screw in the right HINGE PIN. Carefully and slightly open the Charcoal HOOD and insert
the center HINGE PIN from inside the charcoal grill through the HOOD then through the Gas HOOD
and Body as shown. Then insert COTTER PINS through the holes in the three HINGE PINS.
Hinge Pin
Center Hinge Pin
page 15
™ & © 2006 Char-Griller / A&J Mfg.