Ventilation, Installation options, Install a decorative door panel – Thetford DE0251T Series-EV User Manual

Page 7

Advertising
background image

7

Be sure the refrigerator is not in direct sunlight or near a gas stove, a heater, or other
heat-generating appliances. Avoid installing your refrigerator close to warm water lines
or warm air ducts.

Your refrigerator was thoroughly cleaned before shipment from the factory.
It is advisable, however, to clean the interior once more before using. Wipe the interior
with a cloth and warm water. Then wipe with a dry cloth.

Ventilation

Sufficient ventilation (airflow) over the rear mounted condenser of the refrigerator is
necessary for the refrigerator to operate correctly (See Art01582).

* NOTE: The fan will operate only when

the ambient temperature is
higher than approximately 95° F.

CAUTION:

Do not remove the

bottom rails from the refrigerator
cabinet. The rails supply space
under the refrigerator that is neces-
sary for correct ventilation.

If you do not make sure that the
ventilation is correct, a shortened
refrigerator life expectancy, poor
refrigeration, continuous operation,
accelerated battery discharge and a
void warranty will result.

Installation Options

Install a decorative door panel

NOTE: The decorative door panel must be

4 mm or less in thickness.

1. Remove the door from the refrigerator

by removing the two (2) bolts that attach
the door hinge to the bottom of the
refrigerator (See Art01583).

Advertising
This manual is related to the following products: