ThingMagic Nomad RFID Setup Guide - Manual (Page 11)

Nomad RFID Reader Setup Guide 11
Assembling the Nomad RFID Reader
1. All Documentation, Software and Firmware are available for download from:
http://www.trimble.com/nomad-drivers - Drivers
http://www.trimble.com/nomadsupport - Setup Guide
NOTE : The RFID SearchLight application must be installed on the Nomad Handheld in order
to use the RFID reader. Use of all software and firmware is governed by the then-current End
User License Agreement or Shrinkwrap License Agreement (Software).
2. Remove existing battery door using Phillips-head screwdriver on stylus.
Back view with battery cover on Back view with battery cover off
Removing the WWAN screws
Securing the Nomad RFID Reader