Torbal DK1 Density Determination Guide - Manual (Page 3)

3
1. Enter the two values into the top portion of the spreadsheet where the Sinker volume is
calculated, or
2. Use the formula; Volume in cubic cm = Buoyancy in g / Density in g/cubic cm
Determining the buoyancy of the Sinker in the unknown fluid
1. Repeat the 4 steps used to determine the Sinker volume above, but replace the distilled water
with the fluid whose density is to be determined.
Calculating the fluid density
1. Enter the two values into the Fluid Density portion of the spreadsheet where the Fluid Density is
calculated, or
2. Use the formula; Density in g/cubic cm = Volume in cubic cm / Buoyancy in g