Cerwin-Vega Professional Audio Mixer CVM-1224FXUSB - Manual (Page 8)

8
FRONT PANEL CONTROLS – MAIN CONTROL SECTION
(1). VFX PROGRAM DISPLAY
The Program LED displays the number of the
selected effects program. Use the table located
above the VFX (EFX)ON/OFF switch to lookup the
desired effects.
(2). VFX PROGRAM SELECT SWITCH
This program knob selects one of the 100 built-in
digital effects, for each number you select. The VFX
programs feature a 24 Bit Digital Effects processor
with high quality, studio grade effects like Delay,
Chorus and Reverb.
(3). AUX PRE CONTROL
Adjust the level of the signal sent from the internal
digital effect to the AUX bus.
(4). VFX (EFX) ON/OFF SWITCH
This switch turns the internal digital effect on/off.
(5). PFL SWITCH
Set this switch on if you wish to output the effect
signal to the PFL bus.
(6). PFL INDICATOR
This indicator lights when the PFL switch is turned
on.
(7). EFX RTN Fader
Adjust the level of the signal sent from the internal
digital effect to the main bus.
(8). ALT 3/4 OUTPUT FADER
This fader adjusts the final level of the combined
stereo signal sent to the ALT 3/4 output jacks.
(9). MAIN L/R MASTER FADER
These faders adjust the final level of the combined
signals from all channels.
(10). TO MAIN L/R SWITCH
When this switch is on, the signal of each ALT 3/4 will
be sent to the MAIN L/R buses.