Cecilware EL-1624T - Manual (Page 5)

4
Safety
*A Cecilware Recommended Qualified Service Technician should carry out repairs if necessary. Do not
remove any components or service panels on this product.
*Switch off power to and disconnect from the power source while cleaning.
*Allow the Griddle/Cheesemelter to cool down after using before dismantling for cleaning; the unit will still
be too hot to handle immediately after use
.
*Do not immerse in water or use hose to clean.
*If the power cord is damaged, it must be replaced by a Cecilware Recommended Qualified Service
Technician in order to avoid a hazard.
Trouble Shooting
If your Cecilware Griddle/Cheesemelter does not operate, please check the following before placing a
service call.
Griddle with Cheesemelter EL-1624T, EL-1636T
Problem Cause Remedy
1. Mains power supply 1. Check mains power supply
2. Power switch has not
been turned on
2. Check the unit is correctly plugged in
and turned on
3. Fuse in the plug has
blown
3. Replace the fuse in the plug with
correctly rated fuse
4. Plug and lead are
damaged
4. Call service agent or qualified
technician
5. Internal wiring fault
5. Call service agent or qualified
technician
The unit is not working and the
indicator light is not on
6. Thermal cut-out has
activated
6. This is a safety device that has
disconnected the power: call a service
agent or qualified technician
The unit is heating but the
indicator light is not on
1. The indicator bulb has
blown
1. Replace the indicator light: call a
service agent or qualified technician