Canon iR Series - Manual (Page 34)

Scanning from the Platen Glass 4-3
Scanning
4
5
To preview the image, click the Preview button.
A preview image appears in the Preview Area.
You can use the preview image to do the following.
- Specify the scanning area. For details, see ‘Specifing the Scanning Area,’ on p.4-8.
- Use the toolbar to enlarge image display, or use the settings in the Options sheet to
adjust the appearance of the image.
6
Click the Scan button.
Scanning starts.
When scanning is completed, the Network ScanGear Main Window closes and the scanned
image is transferred to the application.
IMPORTANT
• After clicking the Scan button, do not perform any operation in the Network ScanGear Main
Window until the dialog box showing the scanning progress appears.
• If Network ScanGear does not automatically close after scanning, click the button to
close it.
• Be sure to close the Network ScanGear Main Window before exiting the application.