Wine Guardian Through-the-Wall Cooling System - Install Duct Collars & Ductwork - Manual

1. Remove the two screws located at
the bottom of the condenser side
cover panel.
2. Pull the panel out and down away
from the Through-the-Wall (TTW)
assembly.
3. Place the panel on a soft surface,
a piece of foam or towel so as to not
mar or scratch the panel face.
4. Remove the four (4) screws, metal
brackets and clips as shown making
note of their location and orientation.
5. Remove the diffuser panel by
pushing the panel in from the face of
the cover panel.
Step 1
– Duct Collar and Ductwork Kit
Wine Guardian® Through-the-Wall
How to Install Optional Duct Collars and Duct Work