Vinten Radamec Ci Box ICE Interface - Manual (Page 15)

13
Maintenance
Changing the Data Baud Rate (Ci-1 Only)
Depending on the requirements of the installation, the data baud rates
of the modem input and output channels on the Ci-1 can be
independently changed with the mode selection switches. The
following data baud rates are available for selection:
Set the numbered
switches on the Ci-1
to change the baud
rates.
Routine Maintenance
The Ci box requires minimal routine maintenance, apart from checking
the connections and overall operation periodically.
Routine checks
During use, check the following:
• Check cables for signs of wear or damage. Replace as necessary.
• Check that all cables are connected properly.
Cleaning
During normal use the only cleaning required should be a regular wipe
over with a dry, lint-free cloth. Dirt accumulated during storage or
periods of disuse may be removed with a vacuum cleaner. Particular
attention should be paid to all connection ports.
Output
Settings
Input
Settings
Baud Use 1 2 3 4
4800
For the most responsive control of
heads, although this rate can be
unreliable over longer cable runs.
2400 For longer cable runs
1200 For phone line or RF transmissions