Waukesha Bearings Horizontal Type Self Equalizing Tilting Pad Thrust Bearings with Forced Lubrication - Manual (Page 5)

Thrust measuring load cells are also used in applications where an indication of the actual load on the
bearing is required. These load cells are integral with the thrust pad(s) replacing the supporting disc.
They are strain gauge type transducers, the leads of which, as with the temperature sensors, must be
connected to suitable readout instrumentation.
V. SERVICE
Disassembly procedures generally follow from the assembly procedure for the specific bearing and
machine under consideration.
If replacement or repair of parts are required, prompt attention will be given by Waukesha Bearings
Corporation to supply the necessary service. Refer to the specific bearing drawing and item number
when ordering parts. If repairs are necessary in the field or at other than WBC facilities, particular
care should be taken in two areas.
a. Collar faces must be flat, parallel and square with the shaft. Refinishing by lapping, or
grinding and lapping is recommended.
b. Use a quality high tin babbitt for any rework of the pad faces. Refinish, preferably by
lapping, flat and smooth.