Chauvet DMX-40B - Manual (Page 17)

Midi Operation
The controller will only respond to MIDI commands on the MIDI channel when it is set to full stop. All
MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a
chase, send the blackout on note.
Action ™
1) Press and hold the MIDI/ADD button until
the third and fourth digits on the LED
display blink.
2) Select the MIDI control channel (1~16) via
the BANK UP/DOWN buttons to set.
3) Press and hold the MIDI/ADD button to
store midi setup settings.
Notes ‡
This is the Channel that the controller will receive
MIDI note commands.
MIDI NOTE F UNCTION (TURN ON/OFF)
00 to 07 Scenes 1~8 in BANK 1
08 to 15 Scenes 1~8 in BANK 2
16 to 23 Scenes 1~8 in BANK 3
24 to 31 Scenes 1~8 in BANK 4
32 to 39 Scenes 1~8 in BANK 5
40 to 47 Scenes 1~8 in BANK 6
48 to 55 Scenes 1~8 in BANK 7
56 to 63 Scenes 1~8 in BANK 8
64 to 71 Scenes 1~8 in BANK 9
72 to 79 Scenes 1~8 in BANK 10
80 to 87 Scenes 1~8 in BANK 11
88 to 95 Scenes 1~8 in BANK 12
96 to 103 Scenes 1~8 in BANK 13
104 to 111 Scenes 1~8 in BANK 14
112 to 119 Scenes 1~8 in BANK 15
120 Chase 1
121 Chase 2
122 Chase 3
123 Chase 4
124 Chase 5
125 Chase 6
126 BLACKOUT
DMX-40B User Manual 17 Revised: 2006-12-06 09:36:47