Workrite Sierra HXL Electric Assembly Instructions for 2-leg Electric Workcenters - Manual (Page 5)

4 screws per
End Bracket
3 screws per
Short Bracket
Workrite Ergonomics | 800.959.9675 www.workriteergo.com 5 of 8
Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables
Attach loosely using Pan Head Top Screws
(K). If you use an electric screwdriver, be
sure it is on the lowest torque setting to
avoid stripping the holes in the top.
Tighten all screws connecting brackets to
leg assemblies.
Then tighten all screws attaching brackets
to top.
Attach Feet (sold separately) & Slides
Attach Feet (H) to bottom of legs with Flat Head
Cap Screws (J), using Allen Wrench (M) and tighten
securely. Be sure the longer end of the foot goes
towards the front of the table.
You may have purchased the Styled Feet, that attach
in the same fashion.
Attach Feet Glides (I) to bottom of feet. Do not screw
in all the way to allow for leveling in step 11
c
c
d
e
J
a
b
H
H
I
5
B
C
B
A
K
K
J
I