Workrite PA-MIS-E Mounting Plate Adaptor - Manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com
#1500156 - Rev A PA-MIS-E Mounting Plate Adaptor Assembly Instructions
A
100 X 200 VESA Plate
Qty: 1
Attach 100 x 200 VESA Plate (A) to the LCD
screen using six screws. See note below regarding
screws.
B
M4 Nut
Qty: 4
Note: It is strongly recommended to use the mounting
screws provided by the LCD monitor manufacturer. Due
to the variety of monitor mounting designs, the mounting
holes at the back of the LCD monitor might not be suitable
for the M4 screws we have provided and could cause
damage to the LCD monitor.
!
1
C or D
A
2
Attach LCD screen to 100 x 100 VESA Mount on
Arm using four M4 Nuts (B).
B
C
M4x10mm Screw
Qty: 6
D
M4x6mm Screw
Qty: 6
To install and adjust your monitor arm, see the instructions
included with the arm you ordered.