Canon IMAGEFORMULA P-150 - Manual (Page 28)

28
4
Set the scanning conditions.
Click [Scanner setting], and set the scanning conditions in the
dialog box that appears.
[Color mode]
Specify the mode (color, grayscale, or black-and-white binary) for
scanning the document. To automatically detect whether the
document is color or black-and-white, select [Auto Color
Detection].
[Page Size]
Specify the page size of documents.
[Dots per inch]
Specify the scanning resolution.
[Scanning Side]
Specify whether to scan one side or two sides. If [Skip blank page]
is specified, blank pages within the document are skipped during
scanning.
[Deskew]
Slanted scanned images are detected, and then straightened.
[Text orientation recognition]
The orientation of text in scanned images is detected, and the
images are rotated so that the text is correctly oriented and then
saved.
[Adjust brightness]
Adjust the brightness of scanned images.
[Adjust contrast]
Adjusts the contrast of scanned images.
[Default]
Returns all settings to their default values.
When you have finished configuring the settings, click [OK] to
close the dialog box.
Hint
When splitting up multiple documents to scan in parts, select the
[Enable continuous scanning] check box on the main screen.
5
Click [Start].
You can also press the start button on the scanner.
Scanning of the document starts.
When scanning of the whole document is completed, the output
settings screen appears.