Chariot Carriers Captain XL - Manual (Page 27)

27
Assembly
Push the wheel arms, with the bend toward the centre of the
carrier and wheel dropouts pointing downwards, into each
VersaWing 2.0.
Press the small button in for each and push the wheel arms into
the VersaWing 2.0 until the large button engages
(Figures 1 to 3).
The wheel arm should nowprotrude about 2 cm / 3/4 inch out of
the rear side of the VersaWing 2.0.
DANGER
Make sure that the wheel arms are correctly attached to the
carrier. Incorrect attachment may lead to loss of the front
wheel during travel and this may lead to an accident.
Guide the quick-release axle through the wheel axle and screw
on the nut. Both skewer springs must be located on each side
so that the narrow side points towards the centre of the hub.