Step 3. set the display language, Step 4. registration, Step 5. set date and time – Motorola DECT 6.0 P8 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3. Set the display language
• Press
and © to select Setup Handset.
• Press © and © to select Language.
• Press © and © to select the language.
• Press © to save.
step 4. Registration
To work as the handset extension, the handset must be
registered to the base of the listed Motorola models on page 2.
• Power on the handset, screen will show Not registered.
• Press and hold 0
for 4 seconds on base.
• Release 0 once IN USE LED is flashing.
• Place the unregistered handset on the charger.
• A confirmation tone is generated if registration is
successful. Handset X is displayed where X denotes the
number of handsets and the phone goes back to idle.
step 5. Set date and time
• Press © to select Date & Time.
• Press © and edit the time in 12hr format. Press © to
toggle AM/PM settings.
• Press © and edit the date.
• Press © to save the settings.
NOTE
If you have subscribed to your network’s Caller ID service, the
date and time is set automatically for all handsets every time a
call is received.