Motorola L303 - Manual (Page 7)

For more solutions, see the full Help section in the user’s guide.
The
[S|
icon is not scrolling when the handset is
placed on the base
♦ Bad battery contact - move the handset slightly
♦ Dirty contact - clean the battery contact with a cloth moistened with alcohol
♦ Battery is full - no need to charge
No dial tone
♦ No base power - check the connections. Reset the phone: unplug and plug
back in the electrical outlet.
♦ Handset batteries are empty - charge the battery pack for at least 24 hours.
♦ Handset may be too far from the base - move closer to the base.
♦ Wrong telephone line cord - use the telephone line cord provided.
Poor audio quality
♦ The base is too close to electrical appliances, reinforced concrete walls or
metal doorframes - move the base away from any electrical appliances.
No ring tone
♦ The ring tone is deactivated.
♦ Increase the volume.
Caller ID does not work
♦ Check your subscription with your network operator.
A Phonebook entry cannot be stored
♦ The Phonebook is full. Delete an entry to free memory.
No display
♦ Try recharging or replacing the battery pack.
♦ Reset the base. Unplug the unit's electrical power, then plug it back in.
♦ If LED is not lit up, then try to unplug the unit's electrical power, then plug it
back in.
When the handset lost its link with the base during
a call
♦ Check the power cord is connected properly into the base.
♦ Check the power adapter is connected properly into an electrical outlet.
♦ Move the handset closer to the base. It may be out of range.
♦ Reset the base by unplugging the unit's electrical power. Wait for around 15
seconds and plug it back in again. Allow up to one minute for the handset
and the base to synchronize.
Noise interference on yourradio or television
♦ Your base or charger may be too close. Move it as far away as possible.
Need more help?
For a full explanation of all features and instructions, please refer to the
user's guide.