Harbor Freight Tools DRILL MASTER 96289 - Manual (Page 9)

Page 9 For technical questions, please call 1-800-444-3353. SKU 96289
SPEciFicATiONS
Electrical Input
120 V~ / 60 Hz / 11.5 A (Peak)
1500 Watts
Heat
Temperatures
Low Setting: 572° F (Maximum)
High Setting: 1112° F (Maximim)
Adjustable Heat
Setting Type
Three-Way Rocker Switch
E179876
71cJ
UNPAcKiNG
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
iNSTRUcTiONS FOR PUTTiNG
iNTO USE
Read the ENTiRE iMPORTANT
SAFETY iNFORMATiON
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERiOUS iNJURY
FROM AcciDENTAL
OPERATiON:
Turn the Power Switch of the tool
off and unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Product Applications
When observing the safety rules, this 1.
Heat Gun is designed for all applications
with hot air that are listed below:
Shrinking of shrinkdown tubing, •
solder connectors and solder
terminals, packaging and electrical
components.
Deforming of articles made from
•
acrylic, PVC, and polystyrene tubing,
plates, and profiles as well as most
woods.
Welding of thermoplastic polymer,
•
flooring materials of PVC and
linoleum, PVC-coated fabric,
tarpaulins and foils.
Soldering of tin, special silver solder,
•
SMD elements, cable lugs, and for
loosening soldered connections.
Paint removal. Removal of old and
•
even thick coatings of oil paint,
varnish, and synthetic plaster.
Drying of color shade samples, filter,
•
adhesives, construction joints and
stucco forms.
Joining adhesives. Large surface
•
gluing with contact adhesives,
activation of pressure sensitive
adhesives, acceleration of bonding
processes, releasing of bonding
points as well as releasing or bonding
of edge bond or veneer.
Defrosting of icy stairs and steps,
•
door locks, trunk lids, car doors or
water pipes, as well as for defrosting
refrigerators and ice boxes.
Disinfection. With the tool set at
•
1112° Fahrenheit, animal sites/
stables may be disinfected.
Woodworm infestation may be
controlled (Caution: Danger of fire.
REV 08c, 10c