Cadillac 2006 SRX User Manual

Page 202

Advertising
background image

Mirror to Curb in Reverse

If your vehicle has the optional memory package, you
will have this feature. When this feature is turned on,
the passenger’s outside rearview mirror will move
downward so you can view the curb when the shift lever
is shifted into REVERSE (R). The mirror will return to
the last known driving position when the shift lever
is moved out of REVERSE (R). See Outside Curb View
Assist Mirror
on page 2-39 for more information.

Programmable Modes

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to which the
vehicle was programmed may have been changed
since it left the factory.

To program the vehicle to a different mode, use the
following procedure:

1. Enter the personalization portion of the SETUP

menu following the instructions listed previously.

2. Turn the TUNE/SEL knob until MIRROR TO CURB

IN REV is highlighted.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, a check mark will
appear next to the feature name.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

3-78

Advertising