Garmin GPS 89 - Manual (Page 54)

TItftCK L~gs~
RECORD; Ves
CftlTERIfl:
Automotic
HEnORT USED
45
Of
2048
points C
2y-^
TftACSnCK'i
TnuàLogF^ge
Ctcar the triidii log IP
unduatr ÛK jcjren or iP
tegin a TracBuck
tkA6k L66~
RECORD; Vos
CRITERIA:
Dime IntervKTi:
0№00:30
HEnORV USED
7 Of 2048
points < 0X>
CLBtR LOG?
TRA^ACK'T
ypii may fetecl how often
troch ppinli are taiJ J phti ,
whicli will the àiplay
pn ihf map page.
Comtldown Timer (contimicd)
When the timer expires (at 00:00:00), you will be
informed with a message. The timer will also automatically
transition to the count up mode and display how much time
has elapsed since the timer expired. The count up timer wiii
keep a running dock until it is manually reset.
lb set the comii op timet or eater a starting time:
1. With the timer field in the count Up’ setting, highiightthe
time field and press A.
2. Press the 4 key to reset the field, or use the arrow keypad
to enter a starting time tor the timer. Press dH to finish
and restart the timer.
Track Log Options
The next listing on the main menu page is the track bg,
which lets you manage and erase the GPS 89’s tracking data.
From the track log page, you can select whether or not to
record a track and define how it is recorded.
The track log option sets the number of points the unit
will attempt to display on the map page. The dehwlt setting
of 250 points provides good resolution with minimal screen
dutter. The maximum setting is 2048 points. Once you’ve
reached the maximum number of track points, the older
points will be lost as new points are added. Note that adjust­
ing the track points displayed will not affea whether or not
the receiver records a track log or the ability to create a
TracBack route. The track log setup page lets you manage the
GPS 89’s tracking data. From this page, you can select
whether or not to record a track and how it is recorded.
1b torn the track lag oa or off:
1. Highlight the IIECORD' field and press 41.
2. Sdect Yes’ or 'No' and press 41. NOTE; Turning the
track recording off will disable the TracBack feature.
The stored track criteria determines how often positions
arc stored in the track log. The default setting is automatic,
and stores tracks based on resolution. This setting gives you
the most efficient use of track memory and provides the most
accurate TracBack route.
50