Motorola DIGITAL CABLE RECEIVER DCT2500 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLESHOOTING
Problem
Possible Solution
No power
Reconnect the power cord. Be sure the DCT2500 is plugged into an outlet that is always
live.
Remote control does not work
Press CABLE on the remote control to ensure the remote control is in cable mode.
Change the batteries in your remote control according to the instructions in the section,
“Installing Batteries.”
Be sure that nothing is on the DCT2500 or blocking a clear line of sight between it and
the remote control.
3 0
Advertising