Coleman SKYDOME 9392-513 - Manual

Pole Assembly
–You will need to assemble and connect one
pole at a time to the hub.
–Do not completely assemble poles.
a) Beginning at spring-clip end of pole,
assemble all but the last shock-corded
section. The pole and one section
should curve downward. (illus. 1)
b) Locate the center top clip on the fabric
and attach it to the Hub
(illus. 1), (illus. 3)
c) Starting at the corner, Insert the
spring-clip end of the pole through the
webbing loop and then into the
pole sleeve pushing it toward the center
(illus. 1)
d) Insert the spring-clip end into one of the
hub ports until it clicks into position.
That pole will now partially stand up.
(illus. 2), (illus. 3), (illus. 4)
e) Repeat for each of the three
remaining poles (illus. 3)
13’ x11’ SkyDome
™
Screenhouse
1
When You Are Ready To Set Up Your
Shelter
–Select a level area clear of rocks,
branches and other hard or sharp objects.
–Do not set up your shelter under trees.
–For easier set up, two or more people
are recommended.
–Place fabric in center of selected location
and assemble above fabric.
ASSEMBLY PARTS
Instructions apply to Part Number 9392-513
Poles (4) Part No. 9392-1071
Hub (1) Part No. 9392-2101
Illus. 3
Poles clipped into position in
the hub
Illus. 2
Poles inserted
into hub
Illus. 1
Poles inserted through
webbing loop and
pole sleeves
Hub
Pole Sleeves
Webbing
Loop
Hub clipped
to fabric