Canon IMAGERUNNER 2230 User Manual
Page 333
Report and List Samples
9-9
9
App
end
ix
■ NO.
The four digit number, that is automatically assigned when the document is accepted for
sending or receiving, is printed. Numbers between 0001 and 4999 are for sending, while
numbers between 5001 and 9999 are for receiving.
■ MODE
The type and mode of transmission are printed.
■ PGS.
The number of pages that were sent or received successfully is printed.
■ RESULT
"OK" or "NG" (No Good) and the transmission time are printed.
If the document has been successfully sent to the recipient, "OK" is printed.
If a sending error occurred, "NG" is printed, the number of pages that were sent
successfully, and the error code are printed on the second line. If none of the pages were
sent successfully, "0" is printed.
If you manually cancel a job which is being sent, 'STOP' is printed instead of the error
code.
Transmission Type:
TX, Delayed TX, Sequential Broadcast TX, Delayed Sequential
Broadcast, Transfer TX, Direct TX, Manual TX, Memory Lock,
ECM TX
Reception Type:
Memory Box RX, Manual RX, Memory RX, Transfer RX, ECM
RX
Mode of Transmission:
G3, G3ECM