Pause time, Pause time -43, P. 5-43 – Canon IMAGERUNNER 2230 User Manual
Page 209: Pause time," on p. 5-43.)
Transmission Settings
5-43
5
Customizin
g F
a
x Se
tting
s
4
Select [On] or [Off]
➞ press [OK].
The selected mode is set.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Pause Time
Some overseas dialing may be affected by the distance or complex routing of
connections when dialing the international access code, country code, and the
destination's telephone number all at once. In such cases, insert a pause after the
international access code. When the machine dials the number, it will pause where
the pause was inserted in the number. This helps to improve the connection.
NOTE
•
You can insert a pause when you dial the fax number using
-
(numeric keys). (See
"Numeric Keys," on p. 2-16.)
•
Pauses entered at the end of dialed fax numbers are always 10 seconds long.
•
The default setting is '2' seconds.
1
Press
(Additional Functions)
➞ [Custom Fax Settings] ➞
[TX Settings].
If necessary, see the screen shots in steps 1 and 2 of "ECM Transmission," on p.
5-41.