Allen&Heath GLD-112 Reference Guide - Manual (Page 49)

GLD Touch Screen Reference V1.4 – Issue 1 49 ALLEN & HEATH
The Template Show ‘Board Reset’ Scene
Each Template Show provides two '
Reset ' scenes in
position 1 and 2. These reset the GLD80 or GLD112 mixer
settings to the starting point default for the loaded Template
Show.
The Board Reset Scenes are duplicated in positions 499
and 500 at the end of the list as a backup.
Use this Scene to instantly reset parameters without
affecting the mix configuration, user preferences or the
other Scenes. You can edit its Recall Filter to protect
parameters you do not wish to reset. For example, you
could set the filter to protect the patchbay and master strip
assignments in a festival situation.
Note You can also set Scene Safes to protect selected
parameters for all Scenes, for example to remove the
SoftKeys from Scene recall.
When creating your own User Show from a Template Show
you can choose to overwrite the Scene 1 and 2 contents
with your preferred settings, rename them, write in a
description, set their Recall Filters to reset selected
parameters only, or simply delete them. You can still access
the default reset using Scene 499 or 500 if needed.
The factory default Template Show
The diagram below shows the layout for the GLD-80 mixer.
The larger GLD-112 has its middle fader bank assigned with
input channels.
11.3 Library Manager page
Use this page to edit and transfer User and USB Libraries.
Library memories include:
Channel Processing (Preamp option)
Mix Processing
PEQ
GEQ
Gate
Compressor
FX parameters
Access the libraries at the bottom right of the Channel or
Mix Overview page, or the bottom left of each processing
page.
Factory Libraries - A few built-in Libraries that can provide
a starting point for creating your own user libraries. These
cannot be deleted or transferred via USB key.
User Libraries - Name and store your often used
parameter settings as User Libraries. Overwrite existing
Libraries with new settings.
The Library Manager page lets you rename, delete and
transfer User Libraries to/from USB key.
Library Lists – Libraries stored in the GLD are shown in the
left window, those found on the USB key in the right
window.
To Delete a Library – Touch to select a Library item in the
list. Touch the Delete button. Confirm using the popup.
To Rename a Library - Touch to select a Library item in the
list. Touch the Rename button to open the screen keypad.
Type in a name and touch Apply to accept or Cancel to exit
without changing the name.
USB transfer - View and recall User Libraries directly from
your USB key. There is no need to transfer these to the GLD
first. You can overwrite Libraries on the USB key with new
settings, or store them to the GLD as new items.
Touch the Copy to GLD button or Copy to USB buttons to
transfer Libraries.