Reference – Allen&Heath ME-1 User Manual

Page 31

Advertising
background image

User Guide – AP8997 iss.3

31

ALLEN

&

HEATH

9.

Reference

9.1 Working with USB keys

We recommend that you start with a
reformatted USB key.
Check the key - Plug in and check that the
key is recognised by the ME-1. To do this

press the Recall key. The screen should
display a list of presets already on the key or
the following message if blank:

Folders - ME-1 automatically creates folders

in the root directory of the USB key when it is
plugged in:

ME1CFG

For configuration files

ME1PST For

presets


Files - Config and preset files have the same
.ME1 extension and must therefore be placed
in their correct folders if you copy them

between computer and USB key.
Files can be identified by their size:
Preset

= 4KB

Config

= 72KB

The files are not time stamped as ME-1 does
not have a built-in clock.

File names – ME-1 uses 8.3 short file names.

It will not recognise file names longer than 8
characters. It will convert lower case
characters to upper case.
ABCD5678.ME1
Therefore if you wish to rename files on your
computer before transferring them to ME-1
mixers make sure the names are no longer
than 8 characters and comprise the following

character set:

0-9, A-Z, space



9.2 To Reset the ME-1

To perform a hard reset:
Hold down the Shift + Recall + Master keys
and power up the mixer. Release the keys
once the following screen appears. Confirm
to reset the mixer.

Resetting the ME-1:

Assigns all keys to Auto Mode

Assigns all keys for preset Store/Recall

Assigns all key names to default

All levels off, pans mid, mutes off

All presets blank (cleared)

Config name = DEFAULT

Unit name = default (MAC address)

9.3 To Reset auto Names and Links

Names and stereo links received from the
source can be cleared. To do this:

Hold down Shift and Group to enter the

Menu

screen. Scroll and select System

Setup. Scroll and select Reset Source List.

Note

If you are connecting ME-1 directly to a

source that does not have name and link
data, you can clear any previously received

names and stereo links using this function.

Recall:

+Press a key

No USB Presets

Reset System?

This will clear all!

OK

Cancel

Reset Source List

Mic Mute:

Config:

MATT

Unit:

MM4

Firmware: V1.11r1485

Advertising