Allen&Heath QU-PAC - Manual (Page 10)

Qu-Pac Getting Started Guide 10 AP9815 iss1
6. Front Panel
Touch Screen
- All live mixing, setup and memory management
functions can be controlled from the Qu-Pac front panel. The colour touch screen
provides quick access to these functions. The top presents tabs for the available
pages. The bottom presents a toolbar showing status information.
Screen Rotary
- Adjusts the value of parameters on screen. Touch a
parameter. It highlights orange to show it is selected. Turn the Rotary to adjust its
value.
Fn key
- Press to open an option pop-up page for the currently selected
screen. Its function, if available, is shown in the screen toolbar above the key. For
example, the
Fn key provides quick access to the Libraries while in Processing
screens.
Live mixing screens
- These screens provide quick access to live
mixing functions such as level control and signal processing:
Qu-Control - User assignable custom screen for simple
level, mute and on/off control. A user permission can be set
so that this is the only control available to the ‘Basic User’, for
example bar staff control of zone music source and level at a
venue.
Processing – Follows the active Sel key or button to open
the signal processing screens. This includes the Preamp,
Gate, Ducker, PEQ, GEQ, Compressor, Delay, FX
parameters and more.
Routing – Follows the active Sel key or button to open the
routing assignment screens.
Channel – Follows the active Sel key or button to open a
virtual ‘fader strip’ on screen. This replaces the physical
faders of the other Qu mixer models. It provides a way to
work with the faders when not mixing using an iPad.
The Channel screen presents tabs and Sel buttons to access
any Qu input or output channel, and the DCA and Mute
Group masters.
4
3
2
1
8 1 4 5
7
3 6 2
9
10
11
12