Casio DT-930 - Manual (Page 60)

E-60
Using the Cradle-type Battery Charger
When You Are Using the Down-facing Reader Port Model
When you are using a down-facing reader port model, remove the nose guide before use.
To remove the nose guide, remove the two
screws using a screwdriver.
Setting up the Cradle-type Battery Charger
Use only the AC adaptor specified for use with the Handheld Terminal to connect to an
electrical outlet. Be sure to connect the AC adaptor and turn Handheld Terminal power on
before attempting to charge battery pack.
1
Remove the two desktop guides, L and R,
installed on the charger by sliding them
toward the rear side as shown in the
illustration.
2
Insert the desktop guides, L and R, one at a
time that were accompanied with DT-930 into
each slit and then slide them toward the front
side as shown in the illustration.