B&C Technologies SP Series Commercial - Manual (Page 57)

Table 6.1: Belt Tension Guide
Model in lb
SP-40/45 0.24 6.1 2.4 1.1
SP-60/65/75 0.29 7.4 4.3 2
SP-100/110 0.33 8.4 5.3 2.4
SP-130/135 0.3 7.6 4.8 2.2
SP-155/165 0.29 7.4 5.4 2.5
SP-185/195 0.52 13.2 7.7 3.5
(b) Unscrew inlet hose and remove filter screen.
(c) Clean with compressed air and reinstall. Replace if worn or damage.
8. Tighten motor mounting bolts and bearing housing bolts, if necessary.
9. Use compressed air to clean lint from motor.
10. Clean external water and steam filters
Figure 6.3: Steam Trap Service
6.5 Care of Stainless Steel
Maintain the natural beauty of stainless steel and prolong its service life by following these steps.
1. Ordinary deposits if dirt and grease can be removed with detergent and water. The metal
should be thoroughly rinsed and dried after washing. Periodic cleaning will help to maintain
the bright surface appearance and prevent corrosion.
53