B&C Technologies IS Series Commercial Ironer - Manual (Page 30)

4.2.2 Waxing
Waxing is not required for models equipped with chrome plated ironing cylinder. If you choose to
wax or lubricate the cylinder we recommend a synthetic high temperature ironer wax (for example
”‘One Shot”’, ”‘Gold Label”’, ”‘Euroglide”’, etc.). Karagami organic wax can also be used but can
leave a brown residue in the belts and on the cylinder over time. Apply the wax to a flat sheet, fold
the sheet in half covering the wax, and feed the sheet thorugh the ironer starting from one end and
working to the other so that after multiple passes the entire cylinder has been waxed lightly. Doing
this once bi-weekly or monthly is generally enough, however you must experimentally determine
the frequency in order to obtain the best results with your goods in your process.
27