AVF PM-D - Manual (Page 8)

3
PM-CAM (PM-D only)
eye level cam mount
TV's hidden for
mount visibilty.
PM-S
PM-CMP
Codec mounting plate
PM-HDCB
High Def Codec Bracket
PM-CVR
Base cover (2 pc)
Finishing
PM-D
Step 7 Page 8
of 8
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive, Aurora , Ontario L4G OG9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Optional accessories
center
center
Optimal placement of base.
If your cart did not have pre-drilled holes and you need
to locate the mount:
Remove grommet if present, surface must be flat.
Place base 3" back from center.
Mark hole center locations with punch or pencil
Drill through with an 3/8 drill.
Place base and insert all 6 Carriage bolts to confirm holes.
See www.video-furn.com for
latest optional accessories.
Congratulations! you're done.
You will notice you have a bit of hardware left over
which you may need in the future.
We suggest placing this in a small bag and taping it
inside the bottom back of the spine.
(A PM-S can be upgraded to a PM-D by ordering a PM-D expansion box)
If you have any problems,questions or suggestions, we value
your feedback. Toll free 1-877-834-3876