Bradford White EF-100T-399-3X - Manual (Page 3)

3 238-50320-00A 3/13
Install PVC pipe coupling over air intake pipe connection
and cement to pipe using appropriate solvent and cement.
Wet gaskets of DuraVent PVC Adapter using finger.
Insert male gasketed end of DuraVent
PVC adapter into PVC pipe coupling.
Install DuraVent Adapter Connector Clamp (PPS-PAC) over the
PVC coupling so that clamp brackets secure the shoulder of PVC
adapter fitting. Tighten clamp screws securely.
WARNING
DuraVent Adapter Connector Clamps (p/n: PPS-PAC) MUST be properly
installed to secure the PVC Vent Adapter. DO NOT operate the vent system
without first installing the Flue Adapter Connector Clamps.
Water Heater PVC Air Intake
Pipe. Use appropriate
solvent and cement to
cement coupling to pipe.
PVC Pipe Coupling (not
supplied with water heater)
Wet gasket using water
with finger
Male Gasketed end of PVC
adapter
Flue Clamp band fit over PVC Adapter
shoulder and PVC Coupling. Tighten
clamp screws securely with screwdriver.