Clarion AUTOPC 310C - Manual (Page 166)

Clarion AutoPC Owner’s Manual
154
1. Warm reboot:
•
Push Reset Switch 1 (near the CD eject
button) with the tip of a ball-point pen or
a similar object. Note: All unsaved
data in the open file will be erased.
2. Cold reboot:
•
Push and hold Reset Switch 2 first with
a thin wire and, simultaneously push
Reset Switch 1 with the tip of a ball-
point pen.
•
Release Reset Switch 1 first, and after
two seconds, release Reset Switch 2.
NOTE: This procedure will initialize
all data to the shipment condition.
Backing up the necessary data on a
CF Card is strongly recommended.
Warm reboot
Cold reboot
Reset Switch 1
CD eject button
Reset Switch 2