Remote disarming, Tamper alert, Silent arming / disarming – Clarion MS3001 User Manual

Page 10

Advertising
background image

MS3001 / MS3200 Owner’s Manual - Page 7

Remote Disarming

To Disarm the System:

Press Button 1.

• The siren will chirp twice.*
• The doors will unlock.
• The parking lights will flash twice.
• The dome light will turn on.
• The LED will turn off.

* The siren chirps during disarming will alert you if the system had been triggered while armed.

2 chirps

= normal disarming

1 long chirp + 1 short chirp

= Tamper Alert - system was triggered

Tamper Alert

On Disarming, if the system responds with one long chirp and one short chirp, indicating the
system was triggered, the LED will flash for 60 seconds to indicate the zone that triggered the
system.

LED Flashes (60 seconds):

1 flash

=

door

2 flashes

=

Shock Sensor

3 flashes

=

optional sensor

4 flashes

=

hood / trunk

example: flash-flash-pause-flash-flash-pause = Shock Sensor

Silent Arming / Disarming

Each Remote Transmitters can be individually set to Arm and Disarm the system with or without
chirp confirmation at the time they are programmed into the system (see Adding a New
Transmitter into the System
).

To temporarily cancel the Arming and Disarming confirmation chirps, you can Arm or Disarm the
system by pressing Buttons 1 and 2

together.

Note: The confirmation chirps will only be cancelled if the system status is normal. The chirp indications for the open

zone warning will not be cancelled when the system is Armed or Disarmed silently .

MS3001_owner's.qxd 9/10/99 5:27 PM Page 7

Advertising
This manual is related to the following products: