Home Styles 5033-949 - Manual (Page 2)

Assembly Instructions
STEP 1
STEP 2
Attach the Back Frame (D) to the
unit with Flat Washers, Spring Washers,
Head Cap Bolts (short),
Head Cap Bolts (long) and Wood Screws.
(see Figure 2), (see Figure 3)
Tighten up all Head Cap Bolts.
Wood Screw
Figure 1
D
Flat Washer
Spring Washer
Head Cap Bolt
Head Cap Bolt Assembly
(Legs Part)
Flat
Washer
Spring
Washer
Head Cap Bolt
(long)
Hex Wrench
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor
A
Wood Screw
Arrow Sticker
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
(Short)
Hex Wrench
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt (short)
B
C
F
G
E
Attach Leg (B) and (C) to Seat (A)
with Flat Washers, Spring Washers and
Head Cap Bolts.
Tighten Head Cap Bolts only half way.
Attach Front Stretcher (G) to the unit
with Wood Screws.
Attach Side Stretcher (F) to Leg (C) and
Side Stretcher (E) to Leg (B) with Wood
Screws. (see Figure 1), (
See “Arrow” sticker
indicating front side)
Figure 2 Figure 3