M2TECH Young DSD - Manual (Page 13)

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014
Copyright © 2014, M2Tech Srl
13
M2Tech
www.m2tech.biz
3. Back Panel
Figure 2
5) Outputs. Connect the YOUNG DSD to your amplifier/preamplifier with balanced
inputs using balanced cables terminated with three-pole XLR connectors. Should
your amplifier only be provided with single-ended inputs, you may insert the stock
high quality adaptors into the YOUNG DSD outputs and then connect the YOUNG DSD to
the amplifier using coaxial interconnect terminated with RCA plugs. The YOUNG DSD
is provided with Gold-plated male XLR sockets.
NOTE: Ground on pin 1, send (hot) on pin 2, return (cold) on pin 3. If your
amplifier requires hot on pin 3 and cold on pin 2, the connection will be
inverting. In this case the absolute phase can be obtained using the “phase”
feature of the YOUNG DSD
YOUNG DSD YOUNG DSD YOUNG DSD (please refer to chapter 7 for more details).