Magnum Dynalab MD-108 - Manual (Page 11)

11
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE POSSIBLE SOLUTION
No sound, meter
lights are not on
•
Power cord disconnected
•
Power off at source
•
Fuse blown
•
Connect power cord
•
Check AC source
•
Check fuse
No sound, meter
lights are on
•
Interconnect not properly
installed
•
Preamp set to wrong source
•
Bandwidth switch not
activated
•
Power amp off
•
Tube failure
•
Check installation of
interconnects
•
Turn preamp to tuner
•
Activate one of the
bandwidth switches
•
Turn on amp
•
Replace tubes (12ax7)
Signal strength is low
•
Antenna not connected
•
Wrong type of antenna
•
Station too far away
•
Antenna pointed the wrong
way
•
Check antenna hookup
•
Check instruction manual
for types of antennas
•
Change your antenna
•
Rotate the antenna to point
at the station
Reception is poor
•
Antenna not connected
•
Wrong type of antenna
•
Cross talk from neighboring
stations
•
Multi-path is occurring
•
Antenna switch on wrong
setting
•
Check antenna hookup
•
Check instruction manual
•
Switch to narrow setting on
IF bandwidth
•
Rotate your antenna, read
the Reception Techniques
•
Check antenna input setting
Intermittent sound
•
Mute switch is on
•
Turn mute switch off