Magnum Dynalab MD-102T - Manual (Page 7)

- 7 -
DISPLAYS AND METERS
H. SIGNAL STENGTH/ MULTI-PATH METER – This meter’s readout is dual
function and is controlled by switch F (shown on diagram).
I. FREQUENCY DISPLAY – Displays the station via a numeric value, the
frequency that your tuner is dialed into. Display ranges from 87.5 MHz
through 108.5 MHz. This readout is controlled by the tuning knob (G on
diagram).
J. CENTER TUNER METER – Indicates the setting of tuners front end in relation
to the station you are tuning to. In normal situations this needle should be
tuned to the central point of this meter.
A
B C E D
H
G
F
J I