myCharge Amp 2000 RFAM-0700 User Manual
Page 4
6
7
Section III: Charging Devices
When a device is plugged in, AMP 2000 provides charging
power until it is unplugged or the AMP 2000 runs out of
energy. If the AMP 2000 isn't already turned on, press and
hold the AMP power button for 3 seconds to begin
charging.
The AMP 2000’s USB port supports the majority of mobile
devices including smartphones, Bluetooth headsets,
portable navigation devices, MP3 players, and more.
Section IV: Checking Battery Level
To check how much energy is available, press the
battery level check button. The battery icon will
illuminate accordingly:
Green: 71–100%
Yellow: 41–70%
Red: 11–40%
Flashing Red: 0–10%
After 5 seconds, the LED will turn off.
Section V: Maintenance
To keep your AMP 2000 operating at its full potential,
please do the following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section VI: Product Specifications
Battery: 2000mAh Lithium Polymer
Micro-USB Input: 5VDC, 1.0A
USB Output: 5VDC, 1.0A
Section VII: Troubleshooting
My device is not charging: Confirm that your device’s
charging cable is properly connected to the USB port and
the AMP 2000 itself has energy (by pressing the battery icon
button). If the battery icon is red, there isn’t enough energy
to charge your devices—please recharge.
For additional troubleshooting information and device
compatibility, please visit: www.mycharge.com
ONE YEAR LIMITED WARRANTY
RFA BRANDS sells its products with the intent that they
are free of defects in manufacture and workmanship for
a period of one year from the date of original purchase,
except as noted below. RFA BRANDS warrants that
its products will be free of defects in material and
workmanship under normal use and service. This warranty
extends only to consumers and does not extend
to Retailers.
To obtain warranty service on your RFA BRANDS PRODUCT,
contact a Consumer Relations Representative by telephone
at 1-888-251-2026 for assistance. Please make sure to
have the model number and serial number of the product
available.