myCharge Amp 4000 RFAM-0231 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
Visit mycharge.com/videos/AMP to view
the product demo video!
In The Box
• myCharge AMP 4000 ™
• Micro-USB charging cable
• Owner’s manual
Section I: Quick Start
1. Charge up your AMP 4000 with the included USB to
Micro-USB cord through your computer or USB AC
power adapter.
2. As AMP 4000 charges, the battery icon will flash the color
of the battery level. When the unit is fully charged, the
battery icon will turn solid green. Press the level check
button to see how much power is available.
3. AMP 4000 comes equipped with one built-in USB port for
use with your own charging cable. You must press and
hold the AMP power button for 3 seconds to begin
charging if the AMP is not already turned on.
4. Unplug your device when it's charged, and go! Your
AMP 4000 will automatically power off after your device
is unplugged.
Section II: Charging AMP 4000
Connect the included USB to Micro-USB cord through your
computer’s USB port or a USB AC power adapter. Times to
charge the AMP 4000 vary based on what it’s plugged into.
You can expect a full charge from a USB AC power adapter
in about 5 hours or from a standard USB port in about
9 hours.
As your AMP 4000 charges, the battery icon will flash
according to the energy level:
Solid Green: 100%
Flashing Green: 71–99%
Flashing Yellow: 41–70%
Flashing Red: 0–40%
Note: It is normal for your AMP 4000 to be warm to the
touch while in use.
Charge from
your computer
Micro-USB Input
USB-A Port
Power and battery
level check button