myCharge Amp 6000XT RFAM-0239 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
Visit mycharge.com/videos/AMPxt to view
the product demo video!
In The Box
• myCharge AMPxt 6000 ™
• Owner’s manual
Section I: Quick Start
1. Charge up your AMPxt 6000 by using the fold-out prongs
on the back of the unit for fast-charging via wall outlet.
2. As AMPxt 6000 charges, the battery icon will flash the
color of the battery level. When the unit is fully charged,
the battery icon will turn solid green. Press the level check
button to see how much power is available.
3. AMPxt 6000 comes equipped with three built-in USB
ports for use with your own charging cables. Connect your
device(s) to one of the ports available. Charge up to three
devices simultaneously by using all three USB ports. You
must press and hold the AMPxt power button for 3
seconds to begin charging if the AMPxt is not already
turned on.
4. Unplug your device when it's charged, and go! Your
AMPxt 6000 will automatically power off after your devices
are unplugged.
Section II: Charging AMPxt 6000
Charge the Ampxt 6000 by plugging it into a wall outlet.
You can expect a full charge in about 4.5 hours.
As your AMPxt 6000 charges,
the battery icon will flash
according to the energy level:
Solid Green: 100%
Flashing Green: 71–99%
Flashing Yellow: 41–70%
Flashing Red: 0–40%
Note: It is normal for your
AMPxt 6000 to be warm to the
touch while in use.
Section III: Charging Devices
When devices are plugged in, AMPxt 6000 provides
charging power until they are unplugged or the AMPxt 6000
runs out of energy. If the AMPxt 6000 isn't already turned
on, press and hold the battery icon button for 3 seconds
to begin charging.
Up to three devices can be charged simultaneously.
The AMPxt 6000’s USB ports support the majority of
mobile devices including smartphones, tablets, Bluetooth
headsets, portable navigation devices, MP3 players, and
more.
Charge from the wall
Wall prongs
1.0A USB-A Ports
Power and battery level
check button
2.1A USB-A Port