myCharge Freedom 1500 RFAM-0243 - Manual (Page 4)

6 7
As your Freedom 1500 charges, the battery icon will flash
according to the energy level:
Solid Green: 100%
Flashing Green: 71-99%
Flashing Yellow: 41-70%
Flashing Red: 0-40%
Note: It is normal for your Freedom 1500 to be warm to the
touch while in use.
Section IV: Charging your iPhone 5
Press fit your iPhone 5 into the case. Pull out the charging
tether at the bottom of the Freedom 1500 power case
and insert it into the charging port on your iPhone 5.
Press and hold the power button for 3 seconds to begin
charging.
Section V: Checking Battery Level
To check how much energy is available, press the battery
level check button. The battery icon will illuminate
accordingly:
Green: 71-100%
Yellow: 41-70%
Red: 11-40%
Flashing Red: 0-10%
After 5 seconds, the LED will turn off.
Section VI: Maintenance
To keep your myCharge Freedom 1500 operating at its full
potential, please do the following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section VII: Product Specifications
Battery: 1500mAh Lithium Polymer
Input: Micro-USB: 5VDC, 1.0A
Output: Apple Lightning: 5V, 1.0A
Section VIII: Troubleshooting
My device is not charging: Confirm that your Freedom
1500 power case has power (by pressing the battery icon
button). If the battery icon is red, there isn’t enough power
to charge your iPhone 5 – please recharge. If your Freedom
1500 power case is charged up, make sure the Apple
Lightning connector is properly connected to your iPhone 5.
Press and hold the battery icon button for 3 seconds to
begin charging. If this still doesn’t work, use your iPhone 5
charging cable to make sure the device is working properly.
For additional troubleshooting information and device
compatibility, please visit: www.mycharge.com