myCharge Hub 6000 RFAM-0229 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
Visit mycharge.com/videos/Hub to view
the product demo video!
In The Box
• myCharge Hub 6000 ™
• Owner’s manual
Section I: Quick Start
1. Charge up your Hub 6000 by using the fold-out prongs on
the back of the unit for fast-charging via wall outlet.
2. As Hub 6000 charges, the battery icon will flash the color
of the battery level. When the unit is fully charged, the
battery icon will turn solid green. Press the level check
button to see how much power is available.
3. Hub 6000 comes equipped with Apple Lightning and
Micro-USB connectors, as well as a built-in USB port for
use with your own cable. Connect your device(s) to one of
the various inputs available. Charge up to three devices
simultaneously by using all connectors and USB port.
4. When charging through the Apple Lightning connector or
USB port, you must press and hold the Hub 6000 power
button for 3 seconds to begin charging if the Hub is not
already turned on.
5. Unplug your device when it's charged, and go! Your
Hub 6000 will automatically power off after your devices
are unplugged.
Section II: Charging Hub 6000
To charge your Hub, simply
plug the fold-out wall prongs
into a wall outlet. You can
expect a full charge from the
wall in about three hours.
As your Hub charges,
the battery icon will flash
according to the energy level:
Solid Green: 100%
Flashing Green: 71-99%
Flashing Yellow: 41-70%
Flashing Red: 0-40%
Note: It is normal for your Hub 6000 to be warm to the
touch while in use.
Charge from the wall
Lightning connector
USB-A port
Power & battery level
check button
Micro-USB connector
Wall prongs