myCharge Power Bank 3000 MYC-0502-1RM - Manual (Page 3)

4 5
Thanks for choosing myCharge.
In The Box
• myCharge Power Bank 3000 ™
• Micro-USB charging cable
• Owner’s manual
• USB-to-Apple 30-pin charging cable
Section I: Quick Start
1. Charge up your Power Bank 3000 with the included USB to
Micro-USB cord through your computer or USB AC
power adapter.
2. As Power Bank 3000 charges, the battery icon will flash the
color of the battery level. When the unit is fully charged,
the battery icon will turn solid green. Press the level check
button to see how much power is available.
3. Power Bank 3000 comes equipped with Apple Lightning
and Micro-USB connectors, an included Apple 30-pin
charging cable, as well a built-in USB port for use with
your own cable. Connect your device(s) to one of the
various inputs available. Charge up to three devices
simultaneously by using all connectors and USB port.
4. When charging through the Apple Lightning connector or
USB port, you must press and hold the Power Bank 3000
power button for 3 seconds to begin charging if the Power
Bank is not already turned on.
5. Unplug your device when it's charged, and go! Your
Power Bank 3000 will automatically power off after your
devices are unplugged.
Section II: Charging Power Bank 3000
Connect the included USB to Micro-USB cable through
your computer’s USB port or a USB AC power adapter.
Times to charge the Power Bank 3000 vary based on what
it’s plugged into. You can expect a full charge from a USB
AC power adapter in about three hours or from a standard
notebook USB port in about six hours.
Charge from your computer
or any USB port
Lightning
connector
Micro-USB
connector
Power & battery level check button
Micro-USB input
USB-A port