Native Union Switch Speaker - Manual (Page 5)

9 8
English
SWITCH BaSICS
1. POwEr ON/Off
Press and hold the button until you hear the
welcome sound and the white LEd appears,
your SWITCH is now on. Repeat to turn off.
2. sTaNdBy mOdE
your SWITCH will automatically go into
standby mode when there is no Bluetooth
®
device connected for 15 minutes. To wake-
up your SWITCH turn the wheel, or click the
button.
VERTICaL / HORIzONTaL
SWITCH can be used either vertically
or horizontally.
after 30 minutes SWITCH will automatically
turn-off to preserve battery. To turn back on,
push and hold the button until you hear the
welcome sound and the White LEd appears.
ON - Off
CONNECTING
CONNECTINg
1. Make sure your SWITCH is off.
2. Press and hold the button; you will hear
the welcome sound, continue to hold until
you hear the sonar sound, then release.
3. The LED will flash white and red
alternately; you are now ready to pair.
4. activate the Bluetooth ® setting on your
device (the device needs to be within a
metre of the SWITCH).
5. your device will either automatically
search for available Bluetooth
® devices or
alternatively manually instruct your device
to search for Bluetooth
® devices.
6. Select “SWITCH by Native Union”
• If asked enter password 0000
7. You will hear a confirmation sound and the
white LED will flash every 3 seconds – you
are now connected.
BluETOOTH ® wIrElEss raNgE
The Bluetooth ® wireless range is up to 10
meters from your mobile device.
auTOmaTIC rECONNECTION
If your mobile device goes out of range
the white LED will flash. When the last
connected mobile device is back in range
SWITCH will automatically reconnect, the
white LED will flash every 3 seconds and you
will hear a confirmation sound.
If your mobile device does not automatically
reconnect, use your mobile devices
Bluetooth
® menu to reconnect manually.
you only need to pair your device once.
To pair other devices please repeat the
above steps. you can pair up to 8 devices.
English